| DESCRIPTION | Unit | NARA 500 series | ||
| 5010 | 5015 | |||
| Swing | over bed | mm | Ø 500 | |
| over cross slide | mm | Ø 270 | ||
| over gap | mm | (Ø 690) | ||
| Distance between center | mm | 1000 | 1500 | |
| Spindle | Spindle nose | ASA A1-8 | ||
| Spindle bore | mm | Ø 73 | ||
| Taper of hole | M.T | 7 | ||
| Taper of center | M.T | 5 | ||
| No. of spindle speeds | step | 12 | ||
| Range of spindle speeds | r.p.m | 25-1600 | ||
| Carriage & Feed |
No. of feed changes | step | 48 | |
| Range of cross feeds | mm/rev | 0.04-0.345 | ||
| Range of longitudinal feeds | mm/rev | 0.08-0.69 | Max. travel of cross slide | mm | 270 |
| Travel of compound rest | mm | 156 | ||
| Tool size | mm | 25 * 25 | ||
| Thread | Lead screw | mm | Ø40 * P6 | |
| Inch | T.P.I | 4-56 | ||
| Metric | mm | 0.5-7 | ||
| D.P | D.P | 8-112 | ||
| Module | M | 0.25-3.5 | ||
| Tail stock | Max. quill travel | mm | 170 | |
| Spindle taper | M.T | 4 | ||
| Bed | Width | mm | 427 | |
| Length | mm | 2140 | 2640 | |
| Motor | Main | kW | 5.5 | |
| Coolant | W | 100 | ||
| Floor Space | Width * Length | mm | 1300 * 2690 | 1300 * 3190 |
| Height | 1390 | |||
| Machine weight | Kgs | 2190 | 2320 | |
※( ) Option
